DirectX 11 帧缓冲区捕获(C++，无 Win32 或 D3DX)

DirectX 11 framebuffer capture (C++, no Win32 or D3DX)(DirectX 11 帧缓冲区捕获(C++，无 Win32 或 D3DX))

问题描述

我想使用 DirectX 11 将我的前端或后端缓冲区的内容捕获到一个字节数组中，然后我可以将其用作纹理或用作创建文件的源.到目前为止，我有一个交换链设置、大量渲染和以下代码 - 我确保在调用 Present 后调用它们.

I would like to capture the contents of my front or back buffer using DirectX 11 into an array of bytes which I can then use as a texture or as a source for creating a file. I have a swap chain setup, lots of rendering happening and the following code so far - which I make sure to call after the call to Present.

ID3D11Texture2D* pSurface;
HRESULT hr = m_swapChain->GetBuffer( 0, __uuidof( ID3D11Texture2D ), reinterpret_cast< void** >( &pSurface ) );
if( pSurface )
{
    const int width = static_cast<int>(m_window->Bounds.Width * m_dpi / 96.0f);
    const int height = static_cast<int>(m_window->Bounds.Height * m_dpi / 96.0f);
    unsigned int size = width * height;
    if( m_captureData )
    {
        freeFramebufferData( m_captureData );
    }
    m_captureData = new unsigned char[ width * height * 4 ];

    ID3D11Texture2D* pNewTexture = NULL;

    D3D11_TEXTURE2D_DESC description =
    {
        width, height, 1, 1, DXGI_FORMAT_R8G8B8A8_UNORM,
        { 1, 0 }, // DXGI_SAMPLE_DESC
        D3D11_USAGE_STAGING,
        0, D3D11_CPU_ACCESS_READ | D3D11_CPU_ACCESS_WRITE, 0
    };

    HRESULT hr = m_d3dDevice->CreateTexture2D( &description, NULL, &pNewTexture );
    if( pNewTexture )
    {
        m_d3dContext->CopyResource( pNewTexture, pSurface );
        D3D11_MAPPED_SUBRESOURCE resource;
        unsigned int subresource = D3D11CalcSubresource( 0, 0, 0 );
        HRESULT hr = m_d3dContext->Map( pNewTexture, subresource, D3D11_MAP_READ, 0, &resource );
        //resource.pData; // TEXTURE DATA IS HERE

        const int pitch = width << 2;
        const unsigned char* source = static_cast< const unsigned char* >( resource.pData );
        unsigned char* dest = m_captureData;
        for( int i = 0; i < height; ++i )
        {
            memcpy( dest, source, width * 4 );
            source += pitch;
            dest += pitch;
        }

        m_captureSize = size;
        m_captureWidth = width;
        m_captureHeight = height;

        return;
    }

    freeFramebufferData( m_captureData );
}

它总是给我零 alphas 的黑色.

It always gives me black with zero alphas.

我通常可以选择 GDI 互操作来使用 BitBlt 从交换链中复制位图 - 但是我有一些限制，这意味着这不是一个有效的解决方案.

I would normally have the option of GDI interop to use BitBlt to copy a bitmap out of the swap chain - however I have restrictions which means this is not a valid solution.

还有 D3DX 库，其中包含执行这些操作的功能.

Also the D3DX library, which contains functionality for doing bits of this is also out of the question.

推荐答案

所以.更多的实验揭示了问题".通过获取帧缓冲区纹理的描述并将其用作创建新纹理的基础，问题得以解决...

So. A little more experimentation revealed the "problem". By getting the description of the framebuffer texture and using that as the basis to create the new texture the problem was resolved...

ID3D11Texture2D* pSurface;
HRESULT hr = m_swapChain->GetBuffer( 0, __uuidof( ID3D11Texture2D ), reinterpret_cast< void** >( &pSurface ) );
if( pSurface )
{
    const int width = static_cast<int>(m_window->Bounds.Width * m_dpi / 96.0f);
    const int height = static_cast<int>(m_window->Bounds.Height * m_dpi / 96.0f);
    unsigned int size = width * height;
    if( m_captureData )
    {
        freeFramebufferData( m_captureData );
    }
    m_captureData = new unsigned char[ width * height * 4 ];

    ID3D11Texture2D* pNewTexture = NULL;

    D3D11_TEXTURE2D_DESC description;
    pSurface->GetDesc( &description );
    description.BindFlags = 0;
    description.CPUAccessFlags = D3D11_CPU_ACCESS_READ | D3D11_CPU_ACCESS_WRITE;
    description.Usage = D3D11_USAGE_STAGING;

    HRESULT hr = m_d3dDevice->CreateTexture2D( &description, NULL, &pNewTexture );
    if( pNewTexture )
    {
        m_d3dContext->CopyResource( pNewTexture, pSurface );
        D3D11_MAPPED_SUBRESOURCE resource;
        unsigned int subresource = D3D11CalcSubresource( 0, 0, 0 );
        HRESULT hr = m_d3dContext->Map( pNewTexture, subresource, D3D11_MAP_READ_WRITE, 0, &resource );
        //resource.pData; // TEXTURE DATA IS HERE

        const int pitch = width << 2;
        const unsigned char* source = static_cast< const unsigned char* >( resource.pData );
        unsigned char* dest = m_captureData;
        for( int i = 0; i < height; ++i )
        {
            memcpy( dest, source, width * 4 );
            source += pitch;
            dest += pitch;
        }

        m_captureSize = size;
        m_captureWidth = width;
        m_captureHeight = height;

        return;
    }

    freeFramebufferData( m_captureData );
}

这篇关于DirectX 11 帧缓冲区捕获(C++，无 Win32 或 D3DX)的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持编程学习网！