Eclipse 编译成功但仍然给出语义错误

Eclipse compiles successfully but still gives semantic errors(Eclipse 编译成功但仍然给出语义错误)

问题描述

注意:这显然是 StackOverflow 上经常出现的问题，但是 - 就我所见 - 人们永远找不到方法，或者他们的解决方案对我不起作用

我正在使用 Eclipse Juno ADT.在我尝试更新 NDK 之前，一切正常.我用新版本(即 ndk-r8e)替换了我的 ndk 文件夹(即 ndk-r8d)，并且在我的 Paths and Symbols 配置，我将包含从 g++ 4.6 更改为 4.7.

I am using Eclipse Juno ADT. Everything was working fine until I tried to update the NDK. I replaced my ndk folder (that was the ndk-r8d) by the new version (i.e. ndk-r8e) and, in my Paths and Symbols configuration, I changed the includes to go from g++ 4.6 to 4.7.

它似乎破坏了我的索引:我可以编译我的代码，但是 Eclipse 给出了语义错误，就像 [1] 和 [2].错误主要来自OpenCV4Android使用的符号，如distance，pt、queryIdx 和 trainIdx.

It seemed to break my index: I could compile my code, but Eclipse was giving semantic errors, exactly like in [1] and [2]. The errors mainly come from symbol used by OpenCV4Android, such as distance, pt, queryIdx and trainIdx.

当我尝试备份到旧配置时，索引仍然损坏！我找不到改变这种情况的方法.

When I tried to backup to my old configuration, the index was still broken! I cannot find a way to change this.

• 清理项目
• 索引"子菜单中的重建、刷新和所有其他选项(在项目上右键单击"时)
• 在首选项中禁用/启用索引器
• 验证 trainIdx 等符号仅出现在我的 OpenCV4Android 的 Paths and Symbols 部分中.
• 在 Paths and Symbols 部分更改我包含的顺序.我基本上尝试将 OpenCV 包含在开头和结尾.

• Clean up the project
• Rebuild, refresh, and all the other options in the "Index" submenu (when "right-clicking" on the project)
• Disable / enable the indexer in the preferences
• Verify that symbols such as trainIdx only appear in my OpenCV4Android include in the Paths and Symbols section.
• Change the order of my includes in the Paths and Symbols section. I basically tried to put the OpenCV include in the beginning and in the end.

我认为它是 CDT 索引，原因如下:

I assume that it is the CDT index because of the following:

• 在命令行中，我可以使用 ndk-build clean 和 ndk-build 构建我的项目.
• 当我启动 Eclipse 时，在我打开一个 C++ 文件(来自 jni 文件夹)之前，我没有任何错误.
• 我总是可以构建项目，但只要我打开了一个 C++ 文件，我就无法再运行应用程序了，因为很多 Field '<name>'无法解决.
• 如果我不打开 C++ 文件，Eclipse 不会报告任何错误，并且可以成功构建和部署 Android 应用程序.

• In command line, I can build my project using ndk-build clean and ndk-build.
• When I start Eclipse, I have no error until I open a C++ file (from the jni folder).
• I can always build the project, but as long as I have opened a C++ file, I can't run the application anymore because of a lot of Field '<name>' could not be resolved.
• If I don't open the C++ files, Eclipse doesn't report any error and can build and deploy the Android application successfully.

以下代码在line、queryIdx、pt报错:

cv::line(mRgb, keypointsA[matches[i].queryIdx].pt, keypointsB[matches[i].trainIdx].pt, cv::Scalar(255, 0, 0, 255), 1, 8, 0);

如果我这样写，它可以工作:

If I write it as follows, it works:

cv::DMatch tmpMatch = matches[i];
cv::KeyPoint queryKp = keypointsA[tmpMatch.queryIdx];
cv::KeyPoint trainKp = keypointsB[tmpMatch.trainIdx];
cv::line(mRgb, queryKp.pt, trainKp.pt, cv::Scalar(255, 0, 0, 255), 1, 8, 0);

并不是所有的 OpenCV 函数都未解析:只有 pt、queryIdx 和 trainIdx 是.

It is not that all of the OpenCV functions are unresolved: only pt, queryIdx and trainIdx are.

任何评论将不胜感激.

推荐答案

在 Eclipse 环境中选择的项目首选项中，转到 C/C++ 常规 -> 代码分析 -> 启动.确保两个复选框都未选中.关闭并重新打开项目或重新启动 eclipse 并重建项目.

In your selected project preferences within the Eclipse environment, go to C/C++ General -> Code Analysis -> Launching. Make sure that both check boxes are unchecked. Close and reopen the project or restart eclipse and rebuild the project.

这篇关于Eclipse 编译成功但仍然给出语义错误的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持编程学习网！