在python坞站映像上使用GPU

Use GPU on python docker image(在python坞站映像上使用GPU)

本文介绍了在python坞站映像上使用GPU的处理方法,对大家解决问题具有一定的参考价值,需要的朋友们下面随着小编来一起学习吧!

问题描述

我使用的是python:3.7.4-slim-buster驳接图像,无法更改它。 我想知道如何在上面使用我的nVidia GPU

我通常使用tensorflow/tensorflow:1.14.0-gpu-py3,使用简单的--runtime=nvidiaintdocker run命令一切正常,但现在我有这个限制。

我认为这种类型的镜像上没有快捷方式,所以我按照这个指南https://towardsdatascience.com/how-to-properly-use-the-gpu-within-a-docker-container-4c699c78c6d1构建它建议的Dockerfile:

FROM python:3.7.4-slim-buster

RUN apt-get update && apt-get install -y build-essential
RUN apt-get --purge remove -y nvidia*
ADD ./Downloads/nvidia_installers /tmp/nvidia                             > Get the install files you used to install CUDA and the NVIDIA drivers on your host
RUN /tmp/nvidia/NVIDIA-Linux-x86_64-331.62.run -s -N --no-kernel-module   > Install the driver.
RUN rm -rf /tmp/selfgz7                                                   > For some reason the driver installer left temp files when used during a docker build (i dont have any explanation why) and the CUDA installer will fail if there still there so we delete them.
RUN /tmp/nvidia/cuda-linux64-rel-6.0.37-18176142.run -noprompt            > CUDA driver installer.
RUN /tmp/nvidia/cuda-samples-linux-6.0.37-18176142.run -noprompt -cudaprefix=/usr/local/cuda-6.0   > CUDA samples comment if you dont want them.
RUN export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/cuda/lib64         > Add CUDA library into your PATH
RUN touch /etc/ld.so.conf.d/cuda.conf                                     > Update the ld.so.conf.d directory
RUN rm -rf /temp/*  > Delete installer files.

但它引发错误:

ADD failed: stat /var/lib/docker/tmp/docker-builder080208872/Downloads/nvidia_installers: no such file or directory

如何更改才能轻松让坞站图像看到我的GPU?

推荐答案

TensorFlow图像拆分为几个"部分"Docker文件。One of them包含TensorFlow在GPU上运行所需的所有依赖项。使用它,您可以轻松地创建自定义图像,您只需将默认python更改为您需要的任何版本。在我看来,这似乎比将NVIDIA的东西引入Debian映像(CUDA和/或cuDNN官方不支持AFAIK)容易得多。

这是Dockerfile:

# TensorFlow image base written by TensorFlow authors.
# Source: https://github.com/tensorflow/tensorflow/blob/v2.3.0/tensorflow/tools/dockerfiles/partials/ubuntu/nvidia.partial.Dockerfile
# -------------------------------------------------------------------------
ARG ARCH=
ARG CUDA=10.1
FROM nvidia/cuda${ARCH:+-$ARCH}:${CUDA}-base-ubuntu${UBUNTU_VERSION} as base
# ARCH and CUDA are specified again because the FROM directive resets ARGs
# (but their default value is retained if set previously)
ARG ARCH
ARG CUDA
ARG CUDNN=7.6.4.38-1
ARG CUDNN_MAJOR_VERSION=7
ARG LIB_DIR_PREFIX=x86_64
ARG LIBNVINFER=6.0.1-1
ARG LIBNVINFER_MAJOR_VERSION=6

# Needed for string substitution
SHELL ["/bin/bash", "-c"]
# Pick up some TF dependencies
RUN apt-get update && apt-get install -y --no-install-recommends 
        build-essential 
        cuda-command-line-tools-${CUDA/./-} 
        # There appears to be a regression in libcublas10=10.2.2.89-1 which
        # prevents cublas from initializing in TF. See
        # https://github.com/tensorflow/tensorflow/issues/9489#issuecomment-562394257
        libcublas10=10.2.1.243-1  
        cuda-nvrtc-${CUDA/./-} 
        cuda-cufft-${CUDA/./-} 
        cuda-curand-${CUDA/./-} 
        cuda-cusolver-${CUDA/./-} 
        cuda-cusparse-${CUDA/./-} 
        curl 
        libcudnn7=${CUDNN}+cuda${CUDA} 
        libfreetype6-dev 
        libhdf5-serial-dev 
        libzmq3-dev 
        pkg-config 
        software-properties-common 
        unzip

# Install TensorRT if not building for PowerPC
RUN [[ "${ARCH}" = "ppc64le" ]] || { apt-get update && 
        apt-get install -y --no-install-recommends libnvinfer${LIBNVINFER_MAJOR_VERSION}=${LIBNVINFER}+cuda${CUDA} 
        libnvinfer-plugin${LIBNVINFER_MAJOR_VERSION}=${LIBNVINFER}+cuda${CUDA} 
        && apt-get clean 
        && rm -rf /var/lib/apt/lists/*; }

# For CUDA profiling, TensorFlow requires CUPTI.
ENV LD_LIBRARY_PATH /usr/local/cuda/extras/CUPTI/lib64:/usr/local/cuda/lib64:$LD_LIBRARY_PATH

# Link the libcuda stub to the location where tensorflow is searching for it and reconfigure
# dynamic linker run-time bindings
RUN ln -s /usr/local/cuda/lib64/stubs/libcuda.so /usr/local/cuda/lib64/stubs/libcuda.so.1 
    && echo "/usr/local/cuda/lib64/stubs" > /etc/ld.so.conf.d/z-cuda-stubs.conf 
    && ldconfig
# -------------------------------------------------------------------------
#
# Custom part
FROM base
ARG PYTHON_VERSION=3.7

RUN apt-get update && apt-get install -y --no-install-recommends --no-install-suggests 
          python${PYTHON_VERSION} 
          python3-pip 
          python${PYTHON_VERSION}-dev 
# Change default python
    && cd /usr/bin 
    && ln -sf python${PYTHON_VERSION}         python3 
    && ln -sf python${PYTHON_VERSION}m        python3m 
    && ln -sf python${PYTHON_VERSION}-config  python3-config 
    && ln -sf python${PYTHON_VERSION}m-config python3m-config 
    && ln -sf python3                         /usr/bin/python 
# Update pip and add common packages
    && python -m pip install --upgrade pip 
    && python -m pip install --upgrade 
        setuptools 
        wheel 
        six 
# Cleanup
    && apt-get clean 
    && rm -rf $HOME/.cache/pip

您可以从这里开始:将python版本更改为您需要的版本(可以在Ubuntu库中找到),添加包、代码等。

这篇关于在python坞站映像上使用GPU的文章就介绍到这了,希望我们推荐的答案对大家有所帮助,也希望大家多多支持编程学习网!

本文标题为:在python坞站映像上使用GPU

基础教程推荐